Preparation of film for long term storage

Film Cans

Some form of enclosure is useful for storing a film not only for a degree of protection from physical factors but also for affixing identifying labels. However the selection of an enclosure that will provide adequate protection and will not damage the film over the years of storage is important as some enclosures may not perform as well as others in the longer term. Traditionally motion picture film has been stored in a film can made from either steel (coated or uncoated), aluminium or some type of plastic. The rigid barrier formed by the film can provides some protection from physical abrasion, dust and larger vermin. Cans also provide some short term protection from water and may also slow down the rate of diffusion of pollutants from the environment. Cans buffer the effects of the outside environment to create a microclimate within. The buffering can slow down rapid changes in temperature and absolute moisture content of the air within the can.

Any identifying labels should only be placed on the outside of the can. No other materials should be placed inside the can. In particular paper and especially paper printed with inks. Paper may contain acids as well as being a source of moisture and dust, and is to be avoided. Adhesives and rubber bands should never be used inside a can as these are sources of harmful solvents, sulfur and oxidising agents.

The enclosure material should be chemically stable and free of acids and oxidising agents that may be released slowly over time.

Plastics used for cans should be chemically inert and unplasticised. Some pigments may contain reactive metals, these need to be checked before use. Plastics identified as suitable in the ANSI Standard IT9.2-1991 Photgraphic Processed Films, Plates and Papers - Filing Enclosures and Storage Containers are:

• polyester (polyethylene terephthalate)
• polyethylene
• polypropylene

Plastics to be avoided are those that contain chlorine, such as PVC, or nitrate.

Although not specifically mentioned in the standard, polystyrene is generally considered acceptable due to its inert nature.

Metals should be non-corrosible, such as anodised aluminium and coated or stainless steel. The coating used for metals should be checked to make sure it is not a source of harmful chemicals. If a metal can starts to corrode it should be replaced, especially if the corrosion is occurring on the inside of the can.

To check the compatibility of some materials with photographic items a Photographic Activity Test (PAT) can be performed. The test is useful for papers, cardboard, adhesives and some plastics.

The PAT uses elevated temperature and relative humidity to accelerate any decomposition reactions in the materials being tested. The detector used to measure any pernicious agents is unprocessed collodial silver on a polyester base. At the completion of the test any significant change in density of the detector indicates some incompatibility between the product and photographic materials.

Fig 8.5. Paper stored in an aluminum film can

No paper should be in the can when the film is returned to long term storage. This is especially the case if aluminium cans are used. Many papers contain high levels of acids and peroxides which will damage the film. While high purity (high alpha cellulose) papers are considered suitable for use with photographic materials these are expensive. Managing the types of papers that may be placed in a film can becomes difficult. It is better to link any paper documentation to the film via a clear cataloguing entry and store the papers separately.